- Open a position.
- In the "Element" section, on the "Edit" tab, click "Wall sections":
- The following window opens:
- Enter the total thickness.
- Select "Cavity wall" to enter the thickness of the inner and outer wall.
- Under "Rebate", choose between "Inside" or "Outside" and enter the "Distance".
- Under "Connection bottom", choose between "Wall" and "Floor". If you select "Floor", you can also enter the "Height to FFL".
- Under "Connection top", choose between "Wall" and "Ceiling".
- Under "Hatch", set the pattern of the wall drawing filling.
- Under "Distances inside/outside to the frame edge", enter the distances for left, right, top and bottom.
Was this article helpful to you?
Yes
No