Basics

  2. Home
  4. Basics
  6. Input of elements
  8. Element
  10. Frame

Frame

If you want to change the frame design of a position, proceed as follows:

  • Open a position.
  • In the "Element" section, on the "Edit" tab, click "Frame":
  • The following window opens:
  • Choose one of the following types:
    • Type 1: Bottom rail in side light, door with threshold
    • Type 2: Bottom frame in side light, door with threshold
    • Type 3: Frame all-around, also below door
    • Type 4: Door frame design, bottom rail in side light, door with threshold
    • Type 5: Door frame design, bottom frame in side light, door with threshold
    • Type 6: Door frame design, frame all-around, also below door
  • Confirm with "OK".
  • Select the "All frame profiles the same" option to use identical profiles for the complete frame. If the option is deselected, different profiles can be selected for the frame design.
  • In the following window, select the profiles for the frame design:
Was this article helpful to you? Yes No