Basics

  2. Home
  4. Basics
  6. Input of elements
  8. Hardware
  10. Closer/Drives

Closer/Drives

  • Open the input of elements.
  • In the "Hardware" section, on the "Edit" tab, click "Hardware".
  • Select the field with the hardware.
  • Double-click the "Closer/Drives" section:
  • The "Closer/Drives" window opens:
  • Select filters to limit the selection of closers/drives:
    • Supplier
    • Installation type
    • Brand
    • Information
    • Type
    • Article status
  • Select the required article from the list.
  • Under "General", click "<none>" if you do not want to use a closer/drive.
  • Click "Next" to open the next window.
Was this article helpful to you? Yes No