Changelog
The following additions and corrections were made in the latest update.
2706, 2025
Changelog 12.6.0.807
- The length and number of glazing beads is correctly calculated again for insertions with solid glass connections.
- In curtain wall positions, reinforcement profiles with defined area and profile splice are again correctly displayed on the parts list and printouts.
- For positions with leaf covering filling, hardware can be added again.
- To increase the compatibility of our software with antivirus software and firewalls, the update system has been changed to the https protocol.
- In the input of elements, additional articles with free machining can be opened again.
- Cross sections can be saved again as one and as multiple pages.
- In position frameworks, wall connections can be selected again.
- In the grid input, fields can be deleted again.
- The estimation can be transferred to Excel again via "Interfaces" > "Excel" > "Estimation" for positions without phase assignment.
1006, 2025
Changelog 12.4.1.1702
- In the grid input, internal rails can be added again within arches.
- The required connections are checked for the future update program.
2605, 2025
Changelog 12.4.1.1700
- In the "Assembly names" area of the input of element, all transoms can be selected again.
- In the position drawing, the glass descriptions are displayed correctly again.
- For positions with leaf covering filling, hardware can be added again.
- For sliders and lift-and-slide elements, automatically generated machining for door hardware is placed correctly again.
- Text positions are displayed correctly on the quotation again.
1405, 2025
Changelog 12.4.1.1600
- In the project centre, the "Back" arrow can be used again to navigate to the last accessed section.
- For positions with side lights, the "Transom in partial field" command in the grid input correctly splits the profiles again.
- When splitting side lights with the "Mullion in partial field" command in the grid input, previously selected insertions are retained.
- When adjusting the rebate dimensions with the "Equal rebate dimension in width" command, profile joints between the bottom rail and the mullion profile in side lights are retained.
- Positions with folding doors can be created again.
- For positions with add-on profiles, secondary profiles and gaskets can be selected again.
- After selecting wall connections in the input of elements, the position can be finished again.
- After changing the unit from m² to piece under "price per" in the glazing section, the position can be finished again.
- In the stock list, the required quantity is displayed correctly again.
- The selection of large packing units for T-connections is saved again in the estimation data for the alternative articles.
- Machining on auxiliary profiles is executed correctly again.
- For positions with leaf-covering filling, machining on profile cylinders is executed again on the middle skin.
- T-connection symbols are displayed correctly again in the "Machining" section of the input of elements.
- CNC files can be exported again to FOM-Adir C.
- In horizontal beam statics, cross-sections can be selected again.
- Discount groups are transferred correctly again during the Datanorm export.
- ROMAConnect EOS now displays the net purchase price.
- ROMAConnect text positions now display the net purchase price.
- In external monitoring in the global CE data, identification numbers (CPR) can now be listed multiple times.
- New finishes are now available for several PVC systems.
2504, 2025
Changelog 12.4.1.1501
- Locked positions are now greyed out in the project environment position list with the status "In progress" and loading icon.
- Less memory is now required when creating positions.
- When mirroring a position and swap left hinge and right hinge, the electric control unit (e.g. fingerprint) is retained.
- In coupling profiles, profile extensions can be entered again, even if changes have been made to the wall connections.
- Copied turn-meeting-stile hardware from the user database can be selected again in the hardware input, even if the previously inserted door leaf is replaced by a window sash opening out.
- The area of triangular shaped glass is calculated correctly again.
- In the glass input, glass that has been inserted despite exceeded dimensions is retained when the position is closed.
- The offset dimensions for the pull handle are again automatically transferred from the system and user database to the input of elements.
- In lift and slide doors, lock machining is again added to the slave leaf and to the meeting stile profile.
- In the input of elements, the "Additional articles" section can be opened again if a renamed hardware configuration from the user database is used.
- Labour hours for additional articles are now also applied in position frameworks.
- The element width for additional articles under deleted fields is applied correctly again.
- The insertion information of shaped glass is displayed again in the cross section.
- Changes in the positioning of drawing elements in the plot menu of the cross section are retained when navigating to the next page.
- In the 2D-Optimisation, the dimensions of rotated plates are correctly calculated again.
- Profile lengths are correctly written to the saw file for single blade saws again.
- Saw files with the file name type "Job number" can be generated again.
- CNC groups are now also applied to decoration mullions.
804, 2025
Changelog 12.4.1.1408
- The supplier colours are retained again.
3103, 2025
Changelog 12.4.1.1404
- In the printout "Cross section drawings", descriptions and profiles are displayed correctly again.
2703, 2025
Changelog 12.4.1.1403
- For positions with mullions in partial fields, the insertions are retained after changing the rebate dimension in width.
- Pin and roller supports can be added again.
- Hardware packages can be added again.
- Assembly name labels are displayed correctly in the input of element again.
- When finishing a position, deviating and missing finishes are requested again.
- In the printout "Estimation", the sums of profiles are displayed again.
2103, 2025
Changelog 12.4.1.1401
- Positions can again be assigned to a phase via the context menu of the project environment.
- Text positions can be imported from other projects again.
- Mullions can also be reinserted into the side light if there is an add-on profile under the door as a base profile.
- The sash dimension for the CE data "Resistance to wind loads" is again calculated independently of the selected view of the element.
- For the article type "Accessories length", the number of bars with a bar length of 1000mm is displayed again in the order.
- When importing parts lists into ERPlus, the profiles and articles of the insertions of curtain walls are transferred correctly again.
- Warema elements can also be configured again after adjusting the rebate dimensions in width.
- New NC code format available for Pertici machines.
- Improved performance when installing updates.
1203, 2025
Changelog 12.4.1.1307
- The preview image of door panels in the user database is displayed again.
- Hardware can be added to position frameworks again.
Deutsch
English (UK)
English (US)
Español
Français
Italiano
Nederlands
Polski
Türkçe
Čeština
Ελληνικά