Changelog
The following additions and corrections were made in the latest update.
1308, 2025
Changelog 12.6.1.500
- Free input of wind load in the static project settings is possible again.
- Insertions remain preserved when adding mullions afterwards in partial fields.
- The wall connection configuration "Right, left and top the same" is executed correctly again.
- Positions can be closed again, even if the standard central gasket type defined in the series settings is not supported by the selected insertion.
- The colour selection is displayed correctly again when closing a position.
- For positions with just one field, sun shading splice is possible when using sunshade configurators.
- Colours as well as hardware and glass information are passed correctly again during transfer to Window.ID.
- Positions can be imported into HiCAD again.
- Projects from E-R-Plus can be imported again.
2407, 2025
Changelog 12.6.1.402
- Positions with project glass from other projects can now be successfully inserted and opened again.
- Articles can be ordered again via the EOS order.
- The quantity of insulators is displayed again on stock lists.
- Copied free machining operations can be reinserted in the element input area under "Machining".
- Machining operations for electric controls are placed correctly again.
- Grid price lists can be created again.
- New machine format available for Özgenc Turbocut / Rapidcut 500.
- The Frager-Konfigurator now also takes into account the U-values and weight of the door panel.
- Project and position documents are opened again with the standard program stored in the operating system.
1407, 2025
Changelog 12.6.1.302
- Door hinges in hardware packages are now correctly assigned again, including colour and position selection.
- When removing adjacent fields in combination with door packages, mullions are correctly maintained; cuts and machining are retained.
- The partial width of door leaves can be modified again.
1007, 2025
Changelog 12.6.1.301
- Parts lists can be generated again.
807, 2025
Changelog 12.6.1.205
- In curtain wall positions, reinforcement profiles with defined area and profile splice are again correctly displayed on the parts list and printouts.
- To increase the compatibility of our software with antivirus software and firewalls, the update system has been changed to the https protocol.
2706, 2025
Changelog 12.6.0.807
- The length and number of glazing beads is correctly calculated again for insertions with solid glass connections.
- In curtain wall positions, reinforcement profiles with defined area and profile splice are again correctly displayed on the parts list and printouts.
- For positions with leaf covering filling, hardware can be added again.
- To increase the compatibility of our software with antivirus software and firewalls, the update system has been changed to the https protocol.
- In the input of elements, additional articles with free machining can be opened again.
- Cross sections can be saved again as one and as multiple pages.
- In position frameworks, wall connections can be selected again.
- In the grid input, fields can be deleted again.
- The estimation can be transferred to Excel again via "Interfaces" > "Excel" > "Estimation" for positions without phase assignment.
1006, 2025
Changelog 12.4.1.1702
- In the grid input, internal rails can be added again within arches.
- The required connections are checked for the future update program.
2605, 2025
Changelog 12.4.1.1700
- In the "Assembly names" area of the input of element, all transoms can be selected again.
- In the position drawing, the glass descriptions are displayed correctly again.
- For positions with leaf covering filling, hardware can be added again.
- For sliders and lift-and-slide elements, automatically generated machining for door hardware is placed correctly again.
- Text positions are displayed correctly on the quotation again.
1405, 2025
Changelog 12.4.1.1600
- In the project centre, the "Back" arrow can be used again to navigate to the last accessed section.
- For positions with side lights, the "Transom in partial field" command in the grid input correctly splits the profiles again.
- When splitting side lights with the "Mullion in partial field" command in the grid input, previously selected insertions are retained.
- When adjusting the rebate dimensions with the "Equal rebate dimension in width" command, profile joints between the bottom rail and the mullion profile in side lights are retained.
- Positions with folding doors can be created again.
- For positions with add-on profiles, secondary profiles and gaskets can be selected again.
- After selecting wall connections in the input of elements, the position can be finished again.
- After changing the unit from m² to piece under "price per" in the glazing section, the position can be finished again.
- In the stock list, the required quantity is displayed correctly again.
- The selection of large packing units for T-connections is saved again in the estimation data for the alternative articles.
- Machining on auxiliary profiles is executed correctly again.
- For positions with leaf-covering filling, machining on profile cylinders is executed again on the middle skin.
- T-connection symbols are displayed correctly again in the "Machining" section of the input of elements.
- CNC files can be exported again to FOM-Adir C.
- In horizontal beam statics, cross-sections can be selected again.
- Discount groups are transferred correctly again during the Datanorm export.
- ROMAConnect EOS now displays the net purchase price.
- ROMAConnect text positions now display the net purchase price.
- In external monitoring in the global CE data, identification numbers (CPR) can now be listed multiple times.
- New finishes are now available for several PVC systems.
2504, 2025
Changelog 12.4.1.1501
- Locked positions are now greyed out in the project environment position list with the status "In progress" and loading icon.
- Less memory is now required when creating positions.
- When mirroring a position and swap left hinge and right hinge, the electric control unit (e.g. fingerprint) is retained.
- In coupling profiles, profile extensions can be entered again, even if changes have been made to the wall connections.
- Copied turn-meeting-stile hardware from the user database can be selected again in the hardware input, even if the previously inserted door leaf is replaced by a window sash opening out.
- The area of triangular shaped glass is calculated correctly again.
- In the glass input, glass that has been inserted despite exceeded dimensions is retained when the position is closed.
- The offset dimensions for the pull handle are again automatically transferred from the system and user database to the input of elements.
- In lift and slide doors, lock machining is again added to the slave leaf and to the meeting stile profile.
- In the input of elements, the "Additional articles" section can be opened again if a renamed hardware configuration from the user database is used.
- Labour hours for additional articles are now also applied in position frameworks.
- The element width for additional articles under deleted fields is applied correctly again.
- The insertion information of shaped glass is displayed again in the cross section.
- Changes in the positioning of drawing elements in the plot menu of the cross section are retained when navigating to the next page.
- In the 2D-Optimisation, the dimensions of rotated plates are correctly calculated again.
- Profile lengths are correctly written to the saw file for single blade saws again.
- Saw files with the file name type "Job number" can be generated again.
- CNC groups are now also applied to decoration mullions.