Changelog

Software version 11

The following additions and corrections were made in the latest update.

1202, 2021

Changelog 11.4.35.33

Friday, 12. February 2021|

Correction of the door leave animation in input of elements
The cross-section animation of door leaves in the input of elements works again.
Correction of displaying additional costs in the additional data area in input of element.
If free cost types, which are assigned to the estimation area panels, were used in positions, these were not considered at the display in the element input under other costs.
Correction of an error at facade corner mullions with two screw holes and one insertion frame
The determination of insert dimensions including cross sections has been corrected for insertion frames that are clamped exactly into the facade corner mullion.
Correction for series swap with "Threshold with base profile"
This correction only relates to series where the bottom configuration has been changed to the "Threshold with base profile" type. When using the series swap function to change the position from "Threshold without basic profile" to "Threshold with basic profile", the program did not recognize the changes due to the identical name of the bottom configuration. This error has been fixed.

102, 2021

Changelog 11.4.35.32

Monday, 1. February 2021|

Correction of a program termination when opening text and material positions.
Text and material positions can be saved and opened again after editing.
Correction when entering the fixed price.
Fixed prices of SP articles can now be edited at additional article dialogue again.
Correction of a program termination at the project centre.
Frequent alternate opening of positions now works again.
Correction of a display error in U-value report.
When summarising the values of all positions, the heat loss is displayed correctly again.
Correction of glass dimensions because of glass offsets in curtain walls.
The glass dimensions for curtain walls with frame-axis-frame settings and special glass offset because of high glass weights, are determined correctly again.
Correction of a program termination in relation to E-R-Plus.
After logging out of E-R-Plus, there is no longer a program termination.
Correction of the cable selection at striking plates.
For striking plates of shoot bolts the correct cable is determined.
Correction of a program termination because of missing door threshold profiles.
Positions can be opened again after changing the profile data to "Threshold as base profile".
Correction of a program termination selecting threshold profiles.
Machining on bottom configurations with continuous thresholds are working again.
Correction for electronic control unit machining.
For positions with threshold as basic profiles, the machining of electric control units are correctly positioned again referring to FFL.
Additional saw format available.
The saw format for Murat/Haffner machines has been extended for the TT 425.
Correction for pull handle machining.
Pull handles machinings are correctly positioned again on broadenable profiles.

112, 2020

Changelog 11.4.34.23

Tuesday, 1. December 2020|

Correction of a program termination when selecting sliding elements in element price lists.
Cutting correction for cover profiles in monorail sliding systems.
After copying and mirroring monorail sliding systems, the cuts of the cover profiles are correctly determined again.
Correction of a program termination when printing multi-page CAD drawings.
Removal of a misleading warning when entering hardware in curtain wall insertion positions.
The misleading warning at the automatic determination of the hinge numbers due missing sash weights has been removed during the initial input of curtain wall door insertions.
Correction of a program termination when adjusting the number of hinges.
The number of hinges can now be changed again.
Correction of a program termination when creating saw files in elumatec DGX2 format (with BAZ).
Correction of T-connector machining positioning
At existing profile splices in window/door positions, the T-connectors are now placed in the correct position again.
Correction of a program termination in the structural analysis module
Lengths of multi-span beams can be entered again without errors.
Correction at the window hardware determination after using search and replace.
The window hardware is determined correctly again after sash profiles have been replaced using the "Search and Replace" function.
Corrections for cross glass supports.
The conditions for one-sided and double-sided cross supports are determined correctly again in every case.
Improvement in the structural analysis report.
The individual sections of the structural analysis report are now displayed even more clearly, in consideration of EN 13830:2015.
Corrections of a program termination at text positions.
Text positions can now be assigned to phases again.
New features in the element price list.
A new replacement type for the sash division of L/S/Dr positions is now available. With this type the same glass dimensions in height and width can be defined.
Corrections for replacements in the element price list. Sash profiles of sliding doors are taken into account for replacements.
Corrections in assembly list.
The gaskets are added up per item now.
Enhancements in the U-value determination
U-values are now also determined for pocket systems.
Corrections in the determination of U-values.
The U-value for positions with add-on-profiles is correctly calculated taking into account the minimum and maximum glass thickness.
Correction of a program termination entering project glasses.
The maximum thickness can now be changed again for the space between the panes.
Correction of an display error in cross sections.
The outer sash dimensions of a position are again displayed in vertical section.
Correction of an display error in cross sections.
The vertical section is shown again in connection with delete fields.
Corrections when importing user-defined glass support.
User-defined glass supports are no longer considered when importing glasses from Excel.
Correction when using threshold as basic profile with add-on profile.
The element dimensions can now be changed without removing the add-on profile.
Correction when exceeding maximum glass support weight in the element input. If the maximum stored weight of a glass support is exceeded, these items will still be determined in the parts list.
Correction of a program termination when opening curtain walls.
Curtain walls can now be opened again directly after selecting a project.
Correction of a display error in the glass statics data in the glass input.
The correct symbol is now displayed again when selecting statically adequate glasses.

411, 2020

Changelog 11.4.33.34

Wednesday, 4. November 2020|

Patch of a program termination in Input of Elements.
The height of positions with internal rails can be changed again.
Additions for Dubus Machines.
New NC-Codes are available.
Patch in element pricelists.
Models can be modified again.
Corrections of door handle alignment.
Presettings for door handle heights are considered if the position is completed directly from the element dialogue in the Input of Elements.
Connection adjustments to the ift Rosenheim server.
ift insertion recommendations can be created from the program directly.
Patch of a cross section display error in Input of Elements.
When adding a roller shutter guide the cross section drawing remains.
Correction for ERP export graphic generation.
The graphic is now saved again in the correct file size.
New Callback function available.
Callback requests can now entered in the service menu.

2710, 2020

Changelog 11.4.33.29

Tuesday, 27. October 2020|

Additions for Mecal XML: Required profile rotations for additional clamp orientations are now included in one data set.
Adjustments for machining positions on master and slave leaves.
On different pull handles heights at master and slave leaves, the machinings are now positioned accordingly.
Corrections for machining files of material positions.
It's possible again to create machine files for material positions without machinings.
Patch of a program termination when saving macros in the element pricelist.
Adjustments in the machine settings: The function "Create separate barcodes if number > 1" works for all machines now.
Correction of glass statics data visualisation in the glass input.
The warning symbol was displayed although the glass statics were suitable. This display error has been corrected.