In the "Door hardware" tab, you will find an overview of the input options for labor hours for door hardware. You can define labor hours for door hinges, locks, shoot bolt locks, as well as for operation and shoot bolt releasers. In addition, labor hours for door closers, corner drives, shoot bolt closures and cylinder-escutcheon plates can be defined:
Door hinge
The labor hours can be defined for piece articles.
- Standard per door hinge: Define the labor hours to be calculated for mounting door hinges.
- 2-part with fixing plate: Define the labor hours to be calculated for mounting two-part hinges with fixing plate.
- 3-part with fixing plate: Define the labor hours to be calculated for mounting three-part hinges with fixing plate.
- 2-part with screw anchor: Define the labor hours to be calculated for mounting two-part hinges with screw anchors.
- 3-part with screw anchor: Define the labor hours to be calculated for mounting three-part hinges with screw anchors.
- 2-part barrel hinge: Define the labor hours to be calculated for mounting two-part barrel hinges.
- 3-part barrel hinge: Define the labor hours to be calculated for mounting three-part barrel hinges.
- Concealed hinge: Define the labor hours to be calculated for mounting concealed hinges.
- 2-part weld-on hinge: Define the labor hours to be calculated for mounting two-part weld-on hinges.
- 3-part weld-on hinge: Define the labor hours to be calculated for mounting three-part weld-on hinges.
- Pin hinge: Define the labor hours to be calculated for mounting pin hinges.
- Pivot hinge door: Define the labor hours to be calculated for mounting pivot hinges.
Lock
The labor hours can be defined for piece articles.
- Single: Define the labor hours to be calculated for mounting single locks.
- Multi point: Define the labor hours to be calculated for mounting multi point locks.
Striking plate
The labor hours can be defined for piece articles.
- Standard: Define the labor hours to be calculated for mounting standard striking plates.
- E-opener: Define the labor hours to be calculated for mounting e-openers for striking plates.
Shoot bolt lock
The labor hours can be defined for piece articles.
- Standard: Define the labor hours to be calculated for mounting standard shoot bolt locks.
- E-openers: Define the labor hours to be calculated for mounting e-openers for shoot bolt locks.
Handle type
The labor hours can be defined for piece articles.
- Handle: Define the labor hours to be calculated for mounting handles.
- Knob: Define the labor hours to be calculated for mounting knobs.
- Panic bar: Define the labor hours to be calculated for mounting panic bars.
- Pull handle: Define the labor hours to be calculated for mounting pull handles.
Shoot bolt releaser
The labor hours can be defined for piece articles.
- In rebate: Define the labor hours to be calculated for mounting shoot bolt releasers in rebate.
- Attached: Define the labor hours to be calculated for mounting attached shoot bolt releasers.
Door closer
The labor hours can be defined for piece articles.
- Standard (normal or reverse installation): Define the labor hours to be calculated for mounting standard door closers with normal and/or reversed installation.
- Others (invisible): Define the labor hours to be calculated for mounting invisible door closers.
Corner drive
The labor hours can be defined for piece articles.
- Corner drive: Define the labor hours to be calculated for mounting corner drives.
Shoot bolt closure top
The labor hours can be defined for piece articles.
- Shoot bolt closure top: Define the labor hours to be calculated for mounting top shoot bolt closures.
Shoot bolt closure bottom
The labor hours can be defined for piece articles.
- Shoot bolt closure bottom: Define the labor hours to be calculated for mounting bottom shoot bolt closures.
Cylinder escutcheon plate
The labor hours can be defined for piece articles.
- Cylinder escutcheon plate: Define the labor hours to be calculated for mounting cylinder escutcheon plates.