Elements

After you have entered the insertions, the “Position Properties” are automatically displayed.  Alternatively you can select the “Position Properties” button on the left.

Here you can determine glazing bead and gasket variant.  You can also select drainage, corner connection and colour options.

ENElement001

After this you need to define the profiles of the position.

You select the different profiles from the list on the left.  The active element is highlighted with a question mark.

ENElement002

If you right-click on an item the following context menu appears:

ENElement003

Frequently used items can set as a favourites by selecting the “Add to Favourites” option.
Favourites are always displayed at the top of the list so that they are quickly accessible.

Click on “Item – Information” to get detailed information about a selected item.

ENElement004

 

Insertions

By clicking on the “Insertions” option you can modify the existing insertions in the position.  You can access the insertion input and select the new insertions.

Individual Profile

You may determine individual profiles of a position.  Select a single profile or multiple profiles and click on the “Apply” button to change the items.

Frame

Click on the “Frame” button to assign a new frame to the position.

Mullion

Select the “Mullion” button to insert mullions into the position.

Transom

Click on the “Transom” button to determine new transoms to the position.

Profile Alignment

The “Profile Alignment” function enables you to move profiles in an element.

There are two ways to align profiles, as listed below.

For instance you can set horizontal guide lines.

Click on the “Guide Lines” button and add a new one.

Then select the profile(s) you want to align at the guide line and click on “Apply”.

ENElement007

On the left hand side you will see all alignment possibilities that are available for this profile.

ENElement006

The second possibility is a free offset of the selected profile.

First click on Profile Alignment, then select the profiles.

Click on the “Free Moving” button.

ENElement009

Here you are able to select between the “Relative Profile Offset” and “Absolute Profile Position” options.

Enter a value and click “OK” in order to apply the changes.

 

Profile Connections

Profile connections can be modified by clicking on the “Profile Connections” button.  Select the connections by clicking on the profile connection on your element.  On the left you will see an overview of all possible variations.

ENElement010

 

Profile Extensions

To determine the extensions of a position click on the “Profile Extensions” button.

ENElement011

Select the “All” option to modify the top and bottom extension.  These specifications will be applied to all mullions in the position.

If you click on the “Individual” option you can then select single and multiple mullions by clicking on the mullions you want to extend.

 

Profile Splices

Click on the “Profile Splices” button to determine where you want a profile splice to be positioned.

The following window appears:

ENElement012

Select the “Add” button (or Insert-Key on your keyboard) to define the dimensions of  the profile splice.  Please note that the end-deduction depends on the bar length.

The end-deduction of a profile can be modified in the additional opitimisation.

Secondary Profiles and Glazing Beads can also be considered by ticking the “Also split Secondary Profiles” or “Also split Glazing Beads” checkboxes.

 

Profile Reset

Click on the “Profile Reset” button to determine new profiles for the position.

 

Wall Connections

Use this function to create wall connections.

You are able to determine all items and specifications needed for the wall connection.

ENElement013

If you want to enter an offset please enter a value in the “Offset” field in the bottom left corner.

ENElement014

 

Wall Sections

You can enter specific settings for wall sections.  On the right the preview of the wall section is displayed.

ENElement015

Enter the total thickness and determine a hatch.

2-part walls can also be entered by selecting the “2-Part-Wall” option and defining the thickness of the inner and outer wall.

You can also specify the inside and outside distance of the element edge.

 

Fly Screen

Click on the “Fly Screen” button to integrate fly screens into a position.

A new window with different templates appears:

Select a template and the “Fly Screen” specification window opens:

You can enter your own fly screens in the position library.

 

Internal Rails

Internal Rails can be entered into a position by selecting the “Internal Rail Setting” button.

A new window appears.  Here you can add verticals and horizontals rails to partial fields.

Determine the number of verticals / horizontals rails.

Determine the adjustment by selecting the “Equal Glass Dimensions” or “Enter Free Dimension” option.

ENElement016

ENElement017

ENElement018

Use the “Equal Glass Dimensions” option to make the glass panes equal in the position.

ENElement019

By using the “Enter Free Dimension” option you determine the position of the rails yourself.

ENElement020

 

Add Free Profiles

Click on this button to enter free profiles. Determine the start and endpoint by clicking where you want the profile to start and end.  You may also enter the angle of the rail.

ENElement021

 

Delete Profiles

There are several functions to delete profiles.  Depending on which profile you want to delete, select “Delete all Profiles”, “Delete Profiles” or “Delete Partial Profiles”.

 

Modify Profiles

To change a profile item, click on the “Modify Profiles” button.

 

Align Profiles

If you have entered a diagonal profile, you can align these by using this option.

Click on the start or end point and select the connection possibility on the left.

ENElement022

 

U-Value

This option allows you to display the u-values of the used profiles.

ENElement023

Click on the “Details” button to get more information about the u-values of every profile.

ENElement024

You can also open this infomation in Excel by selecting the “Excel” button.

ENElement025

Dynamic Display of Opening Angle

The opening angle can now be dynamically displayed in the cross section.
Actual glass size must be activated and door hinges have to be assigned.

EN-DynamicCrossSection

Catalogue function using section point

Now you can also display individual cross sections in the printouts.

Right click on the point of the position that you want to display as individual cross sections. Select in the context menu Cross Section -> Set Section Point.

EN-Section-Catalgue001

Give the designation for a text, determine on which printout the section should be displayed, determine the type of marking and the size.

EN-Section-Catalgue002

EN-Section-Catalgue003

Activate the option In Project Plan on Separate Page to printout the section area on separate pages.

EN-Section-Catalgue004