News Blog

New

• The piece editor now displays a 3D view, a length view, and a cross-section view simultaneously, allowing pieces to be inspected from multiple perspectives without continuously rotating the view.
• Selected machining operations are now highlighted in all three views at the same time. The length view automatically scrolls to keep the selected machining visible.
• Machining operations can now be mirrored from left to right with a single click, making it easier to apply machining operations to the opposite side of a piece.
• The mirror function is now available both in the machining toolbar and next to the X position field.
• The machining list now displays an icon for each machining type, making machining operations easier to identify.
• Remnant barcodes can now be matched using the profile name only. This supports setups where a series is not used.
• The main OnBoard screen has been extended with an optional cross-section view next to the 3D viewer, allowing the profile section to be displayed while working.

Improvements

• The piece editor view handling has been enhanced. View layouts are now retained, views can be re-centred by double-clicking, and the cross-section view includes an option to show or hide clamps on portal machines.
• Locked machining operations are now indicated by a clear visual marker for all machining states.
• Manual clamp editing has been extended. The selected machining is highlighted in the 3D view, conflicting selections between lists are prevented, and additional tooltips are available for buttons.
• OnBoard can now utilise significantly more memory, improving the handling of large production lists.

Fixed

• In manual clamp management, the 3D view is displayed correctly again after resizing. The view remains stable while moving clamps.
• Adding a new piece while the 3D clamp view is active can be used again.
• In OnBoard, memory usage now remains stable while loading pieces over longer periods.
• When reopening a production list, bars that are already present in the spooler can no longer be added to production again.
• In remnant piece editing, automatic tool assignment can be used again. In addition, machining icons are displayed with the correct status colour again.
• OnBoard can be closed again immediately after confirming and closing the piece editor.

New

• Profile types can now be selected by barcode scanning based on profile, color, and length.

Improved

• Special barcodes for Add Restbar in Onboard can now be used without series information.
• 3D clamping now detects collisions between the spindle and the machine base.
• Expired license information is now displayed with clear and accurate messages.
• The Manual Clamping form now retains its window layout and viewer configuration between sessions.

Fixed

• The correct side view is now displayed again when opening lists, allowing profiles to be visible immediately.
• New bars created during Onboard optimization now always receive unique BIDs.
• The machine base can now be displayed again in Onboard when enabled.
• Bar repositioning on Pertici Barfeed machines now follows the correct order again.
• The ISO view now remains visible when adjusting transparency.
• Machining operations in Piece Edit can now be removed while red zones are enabled.
• Piece Edit now remains on the current operation after adding or validating changes.
• The Profile Editor now displays the 2D view correctly when opened from a profile selected in Piece Edit.
• Column widths in Scratch Management can now be adjusted to view Start and End values simultaneously.
• Display scaling, PLC error reporting, and profile edit detection have been enhanced on Pertici PX‑
• Machining at angled positions now maintains the required clearance between the tool holder and clamps.
• Automatic clamp management now respects minimum clamp spacing when placing clamps.
• Unique UID values are now maintained for all pieces when opening lists.