On the home screen, click "Settings" > "Print" to open the printer settings:

Margins

  • On the home screen, click "Settings" > "Print" > "Margins" to open the print margin settings.
  • In the "Margins" window, select the required printouts and enter the margin values:
  • Click "OK".

Printer defaults

  • On the home screen, click "Settings" > "Print" > "Printer defaults" to open the settings for the printer defaults. In the "Printer defaults" window, define various default settings for printing:
  • Under "Format", select the page size.
  • Under "Scale", define the size of the drawing on the page.
    • Maximum norm.: Automatically calculated, largest possible scale, rounded to .0 or .5
    • Largest: Automatically calculated, largest possible scale
    • 1000 : 1
    • 500 : 1
    • 100 : 1
    • 50 : 1
    • 20 : 1
    • 10 : 1
    • 5 : 1
    • 2,5 : 1
    • 2 : 1
    • 1,5 : 1
    • 1 : 1
    • 1 : 1,5
    • 1 : 2
    • 1 : 2,5
    • 1 : 5
    • 1 : 10
    • 1 : 20
    • 1 : 50
    • 1 : 100
    • 1 : 500
    • 1 : 1000
  • Under "Title block", select a title block.
  • Under "Alignment", choose whether to use portrait or landscape orientation.
  • Select the "Ignore margins" option if you do not want the entered print margins to be applied.
  • In the area below, define the colours for printing CAD drawings:
    • For lines and arches, define the line weight and print colour.
    • For polygons, define the line weight, fill intensity and print colour.
    • If necessary, select the "Dimension" option and define the line weight and print colour.
  • Click "Set-up viewport" to define the viewport.
  • Click "Save" to save the printer defaults.
  • Click "Discard" to reset the fields to the factory settings.

Viewport

For pre-printed sheets of paper, you can define a viewport area.

  • Under "Viewport", click "Set-up viewport".
  • In the next window, enter the page margins for the viewport on the right side. The defined area is displayed with red dashed lines:
  • Use the buttons in the left toolbar and above the ruler to move objects and graphics, zoom in, zoom out, zoom all, or move the sheet.
  • Click "Apply".

Add new settings block

  • Click "Add" in the upper left corner.
  • Enter a name and click "OK":

Copy settings block

  • Click "Copy" in the upper left corner.
  • Enter a name and click "OK":