• On the home screen, click "CNC" and select "CNC Machining":
  • In the "Systems" window, click "All systems":

Create machining

Machining for face 4/5

  • In the "CNC machining" window, click "Add":
  • Under "Name", enter the name of the machining:
  • Under "Supplier", select the supplier of the profiles on which the machining will be processed.
  • Under "To system," select "All."
  • Under "Group type," select "End machining".
  • Under "Info 1" and/or "Info 2", enter a description for the machining.
  • Under "Reference profile", select a profile as a template that you will use to position the machining.
  • Under "Face," select "Face 4/5".
  • On the "1" tab, enter the following data:
    • Type: Notch
    • Reference Y: O1
    • Start Y: 0,0
    • Reference end Y: I1
    • End Y: 0,0
    • Depth: (x2-x1)+25
  • The preview window at the bottom left shows the result of the entry.

Group machining

  • On the home screen, click "CNC" and select "CNC Groups":
  • In the "CNC Groups" window, click "Add":
  • In the "CNC-Machining-groups" window, select the supplier:
  • Under "Name", enter the main CNC group name.
  • If necessary, select a system.
  • Under "Type", select "Curtain wall bottom point" and click "OK". The "CNC-Machining group" window opens:
  • Click "Add" below the "Profile 1" field to enter the profile numbers to which the machining will be applied.
  • In the next window "Add…", select the profile, select the "Mirror" option if necessary and click "OK":
  • Click "Add" below the bottom field to enter the machining for face 4/5.
  • In the next window, select the machining and click "OK":
  • Click "Save".

Apply machining in the input of elements

  • Create a curtain wall position in the input of elements.
  • Click the "Machining" section.
  • On the "Edit" tab, click "Bottom points":
  • In the "Mullion machining for bottom points" window, double-click "Add bottom point":
  • Select the machining group for the bottom point and press the Enter key to confirm:
  • Click "Close":
  • The result is displayed on the bar drawing in the "Machining" section of the input of elements: