• On the home screen, click "CNC" and select "CNC Machining":
  • In the "Systems" window, click "All systems":

Create machining

Machining for door assembly frames, face 1

  • In the "CNC machining" window, click "Add":
  • Under "Name", enter the name of the machining:
  • Under "Supplier", select the supplier of the profiles on which the machining will be processed.
  • Under "To system," select "All."
  • Under "Group type," select "Profile interconnection sequential".
  • Under "Info 1" and/or "Info 2", enter a description for the machining.
  • Under "Reference profile", select a profile as a template for positioning the machining.
  • Under "Face," select "Face 1".
  • Under "Reference face," select "Face 6".
  • On the "1" tab, enter the following data:
    • Type: Circle pocket
    • Milling type: Contour
    • Reference Y: I1
    • Reference Z: I1
    • Delta X: 0,0 mm
    • Position Y: 17,0 mm
    • Diameter: 10,0 mm
    • 1st machining from (Z): 7,0 mm
    • 1st machining depth: 8,8mm
  • The preview window at the bottom left shows the result of the entry.
  • Click "Save" in the middle right area of the window.

Machining for door assembly frames, face 6

  • In the "CNC machining" window, click "Add".
  • Under "Name", enter the name of the machining:
  • Under "Supplier", select the supplier of the profiles on which the machining will be processed.
  • Under "To system," select "All."
  • Under "Group type," select "Profile interconnection sequential".
  • Under "Info 1" and/or "Info 2", enter a description for the machining.
  • Under "Reference profile", select a profile as a template for positioning the machining.
  • Under "Face," select "Face 6".
  • Under "Reference face," select "Face 6".
  • On the "1" tab, enter the following data:
    • Type: Circle pocket
    • Milling type: Contour
    • Reference Y: I2
    • Reference Z: I2
    • Delta X: 0,0 mm
    • Position Y: -25,0 mm
    • Diameter: 10,0 mm
    • 1st machining from (Z): 0,0 mm
    • 1st machining depth: 9,0 mm
  • The preview window at the bottom left shows the result of the entry.
  • Click "Save" in the middle right area of the window.

Group machining

  • On the home screen, click "CNC" and select "CNC Groups":
  • In the "CNC Groups" window, click "Add":
  • In the "CNC-Machining-groups" window, select the supplier:
  • Under "Name", enter the main CNC group name.
  • If necessary, select a system.
  • Under "Type", select "Profile interconnection sequential" and click "OK".
  • In the next window, click "Add" below the "Base profiles" field to enter the profile numbers of the door frames to which the machining will be applied:
  • Click "Add" below the bottom field to enter the machining for faces 1 and 6.
  • Click "Save".

Define machining for wall connection

  • On the home screen, click "User database" > "Technical data" > "Wall connection":
  • Select a system.
  • In the next window, click "Add":
  • Enter a name for the wall connection:
  • Click in the field below "For Profiles" and then press the INSERT key on your keyboard or right-click in the field and then select "New". Enter the profiles to which the wall connection will be applied.
  • In the "Hardware and CNC" area, under "Machining group", select the machining group created for anchor machining on the wall connection.
  • Click "Save" in the top right.

Apply machining in the input of elements

  • Create a position in the input of elements.
  • Open the "Element" section.
  • On the "Edit" tab, click "Wall connections":
  • Select where and how to place the wall connections:
  • In the next window, under "Centre", select the wall connection you created:
  • Click "OK". In the "Machining" section, the positioning of the anchor machining is displayed in the bar drawing: