myWarema

Table of contents

Requirements

Note:
Contact the company Warema to receive user data for the myWarema configurator:
Warema Support
Phone: 09391 – 20 80 80
Email: edi@warema.de

On the home screen, click "Settings" > "Additional settings":
Open the "Online configurators" tab:
In the "Shading" > "Warema" section, enter your email address as well as password, select the language and enter the customer number.
Click "OK" to save the settings.

Open the input of elements.
In the "Element" section, on the "View" tab, select "Shades" to display the shading in the position drawing:

In the project environment, on the "Start" tab, click "New" > "Position":
Enter the position data and select "Window/Door/Curtain wall position" under "Type":
To create the position, follow the steps described in the articles "Create position" and "Define fields in width and height".
In the "Element" section, on the "Edit" tab, click "myWarema":
The myWarema catalogue opens. Select a product:
Click "Produkt hinzufügen":

In the position drawing, select the field to which you want to add the selected product. To select multiple fields, hold down the CTRL key and click the required fields.
Click "Apply" on the ribbon:
In the next window, select the product status:
- In the "Quotation" product status, basic information about the product is required.
- In the "Order" product status, detailed information about the product is required.
Enter the extension and offset and click "Ok". The myWarema configurator opens:

1 Switch between the different tabs to select all the required information about the product.

2 The price is automatically calculated based on your selection.

3 In the "Curtains" section at the bottom, enter specific information about each field of the product or split sun shading.

4 Click "Übernehmen" to transfer the product data to the position and close the configurator.

The product is displayed in the position drawing:
Finish the position. The position with the selected product is displayed in the position list:

In the position drawing, select the field where you want to split the sun shading. To select multiple fields, hold down the CTRL key and click the required fields.
Click "Sun shading splice" on the ribbon:
In the ruler, click on the dimension points at which the sun shading is to be split.
Click "Apply" on the ribbon:
Then proceed as described in the "Configure sun shading" section.

Open a position that contains a Warema product.
In the "Element" section, on the "Edit" tab, click "Overview" to display the product configurations:
The next window lists all Warema products that are integrated into this element:
Click "New" (1) to add more configurator elements to the position. Then proceed as described in the "Configure Warema product in the input of elements" section.
Double-click an entry or click "Edit" (2) to edit the product status or offsets. The configurator opens. You can change final detailed settings for the product.

Attention!
If you change the product status from "Quotation" to "Order", this process cannot be undone.

Open a project.
In the project environment, on the "Start" tab, click "New" > "Position":
Enter the position data and select "myWarema position" under "Type":
In the next window, click "Start configurator":
The myWarema catalogue opens. Select a product:
In the next window, click "Produkt hinzufügen":
The product data from the configurator is transferred to the created myWarema position:
The product picture is displayed on the "Picture" tab:
Click "Ok". The position from the myWarema catalogue is displayed in the position list of the project environment: