Pin / Roller support

The mullion profiles are attached to the building structure by pin / roller supports. The mullions can extend either over one floor or over several floors.

• Open a position.
• In the "Element" section, on the "Edit" tab, click "Pin/Roller support":
  

Add support to all mullions

• Click "All" to add one support to each mullion:
  
• Select the reference for positioning the supports:
  
• Under "Position", enter the dimensions for the placement of the supports.
• Under "Type", select whether to add pin/ roller supports with or without accessories.
• Under "Package", select a material package and click "OK". The supports are displayed in the position drawing with this symbol:
  

Add support to single mullion

• Click "Individual" to add one support to a single mullion:
  
• In the position drawing, click the respective mullion:
  
• In the next window, click "Add" and enter the data in the area above.

Add multiple supports to all mullions

• Click "Multiple" to add multiple supports to all mullions in one step:
  
• Select the reference for positioning the supports:
  
• Under "Sequential distance", enter the distance between the supports.
• Under "Distance bottom", define the height at which the supports will be placed.
• Under "Type", select whether to add pin/ roller supports with or without accessories.
• Under "Package", select a material package and click "OK".

Delete all supports

• Click "Delete" to delete all supports in the position: